Automatic Shoe Cover Dispenser

8.500 KWD Other Currency

DESCRIPTION

Automatic Disposable Shoe Covers Dispenser Shoe Mould Machine Home Office

Features:

Shoe film installation and use steps:

Step 1: Lift the cover and put it aside.
Step 2: Pick up a roll of shoe film and align the small shafts on both sides of the shoe film with the slots on both sides of the machine
(Put into the card slot on both sides).
Step 3: Pull out the shoe film and lay it flat on the sponge pad of the shoe molding machine. Note: The shoe mold has the glue-adhesive side up, and the non-sticky side is attached to the sponge pad, so that it will stick to the sole. Cover the noodle cover.
Step 4: First, use one foot to step on the paved shoe film slightly, and pull the foot with the shoe film back all the way to the black shoe plate at the back (note that it is not too long to avoid cutting the sleeve) ) Shoe toe should be pressed against the machine and stepped on slightly, the shoe film is cut.
When installing the shoe film, put the glue side up and the non-stick side
The sponge pad is attached to one side, don't reverse it, so as to stick the sole. When sticking the shoe film to the foot, slowly pull back, the length of the shoe film cannot be longer than the black pedal, so as not to affect the cutting film. Because the cutting blade is sharp, do not touch it by hand. Be careful not to let children play with it and pay attention to safety.

Product parameters:

Packing list: